mellanox.onyx.onyx_ptp_interface – Configures PTP on interface
Note
This plugin is part of the mellanox.onyx collection (version 1.0.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install mellanox.onyx.
To use it in a playbook, specify: mellanox.onyx.onyx_ptp_interface.
Synopsis
- This module provides declarative management of PTP interfaces configuration on Mellanox ONYX network devices.
Parameters
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| announce_interval
string
|
configure PTP announce setting for interval, Range -3-1
|
|
| announce_timeout
string
|
configure PTP announce setting for timeout, Range 2-10
|
|
| delay_request
string
|
configure PTP delay request interval, Range 0-5
|
|
| name
string / required
|
ethernet or vlan interface name that we want to configure PTP on it
|
|
| state
string
|
|
Enable/Disable PTP on Interface
|
| sync_interval
string
|
configure PTP sync interval, Range -7--1
|
Notes
Note
- Tested on ONYX 3.6.8130
- PTP Protocol must be enabled on switch.
- Interface must not be a switch port interface.
Examples
- name: Configure PTP interface
onyx_ptp_interface:
state: enabled
name: Eth1/1
delay_request: 0
announce_interval: -2
announce_timeout: 3
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands
list / elements=string
|
always |
The list of configuration mode commands to send to the device.
Sample:
['interface ethernet 1/16 ptp enable', 'interface ethernet 1/16 ptp delay-req interval 0', 'interface ethernet 1/16 ptp announce interval -1']
|
Authors
- Anas Badaha (@anasb)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/mellanox/onyx/onyx_ptp_interface_module.html