Docs4dev
Docs
ansible / latest / collections / purestorage / flasharray / purefa_network_module.html

purestorage.flasharray.purefa_network – Manage network interfaces in a Pure Storage FlashArray

Note

This plugin is part of the purestorage.flasharray collection (version 1.11.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install purestorage.flasharray.

To use it in a playbook, specify: purestorage.flasharray.purefa_network.

New in version 1.0.0: of purestorage.flasharray

Synopsis

  • This module manages the physical and virtual network interfaces on a Pure Storage FlashArray.
  • To manage VLAN interfaces use the purefa_vlan module.
  • To manage network subnets use the purefa_subnet module.
  • To remove an IP address from a non-management port use 0.0.0.0/0

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7
  • purestorage >= 1.19
  • py-pure-client >= 1.6.0
  • netaddr
  • requests

Parameters

Parameter Choices/Defaults Comments
address
string
IPv4 or IPv6 address of interface in CIDR notation.
To remove an IP address from a non-management port use 0.0.0.0/0
api_token
string
FlashArray API token for admin privileged user.
fa_url
string
FlashArray management IPv4 address or Hostname.
gateway
string
IPv4 or IPv6 address of interface gateway.
mtu
integer
Default:
1500
MTU size of the interface. Range is 1280 to 9216.
name
string / required
Interface name (physical or virtual).
state
string
    Choices:
  • present ←
  • absent
State of existing interface (on/off).

Notes

Note

  • This module requires the purestorage and py-pure-client Python libraries
  • Additional Python librarues may be required for specific modules.
  • You must set PUREFA_URL and PUREFA_API environment variables if fa_url and api_token arguments are not passed to the module directly

Examples

- name: Configure and enable network interface ct0.eth8
  purefa_network:
    name: ct0.eth8
    gateway: 10.21.200.1
    address: "10.21.200.18/24"
    mtu: 9000
    state: present
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Disable physical interface ct1.eth2
  purefa_network:
    name: ct1.eth2
    state: absent
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Enable virtual network interface vir0
  purefa_network:
    name: vir0
    state: present
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Remove an IP address from iSCSI interface ct0.eth4
  purefa_network:
    name: ct0.eth4
    address: 0.0.0.0/0
    gateway: 0.0.0.0
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

Authors

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/purestorage/flasharray/purefa_network_module.html