fortinet.fortios.fortios_firewall_ssl_ssh_profile – Configure SSL/SSH protocol options in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.2).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install fortinet.fortios.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_ssl_ssh_profile.
New in version 2.10: of fortinet.fortios
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and ssl_ssh_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
- ansible>=2.9.0
Parameters
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| access_token
string
|
Token-based authentication. Generated from GUI of Fortigate.
|
|||
| enable_log
boolean
|
|
Enable/Disable logging for task.
|
||
| firewall_ssl_ssh_profile
dictionary
|
Configure SSL/SSH protocol options.
|
|||
| allowlist
string
|
|
Enable/disable exempting servers by FortiGuard allowlist.
|
||
| block_blacklisted_certificates
string
|
|
Enable/disable blocking SSL-based botnet communication by FortiGuard certificate blacklist.
|
||
| block_blocklisted_certificates
string
|
|
Enable/disable blocking SSL-based botnet communication by FortiGuard certificate blocklist.
|
||
| caname
string
|
CA certificate used by SSL Inspection. Source vpn.certificate.local.name.
|
|||
| comment
string
|
Optional comments.
|
|||
| dot
dictionary
|
Configure DNS over TLS options.
|
|||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_server_cert
string
|
|
Action based on server certificate is not issued by a trusted CA.
|
||
| ftps
dictionary
|
Configure FTPS options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| https
dictionary
|
Configure HTTPS options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_probe_failure
string
|
|
Action based on certificate probe failure.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| imaps
dictionary
|
Configure IMAPS options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| mapi_over_https
string
|
|
Enable/disable inspection of MAPI over HTTPS.
|
||
| name
string / required
|
Name.
|
|||
| pop3s
dictionary
|
Configure POP3S options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| rpc_over_https
string
|
|
Enable/disable inspection of RPC over HTTPS.
|
||
| server_cert
string
|
Certificate used by SSL Inspection to replace server certificate. Source vpn.certificate.local.name.
|
|||
| server_cert_mode
string
|
|
Re-sign or replace the server"s certificate.
|
||
| smtps
dictionary
|
Configure SMTPS options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| ssh
dictionary
|
Configure SSH options.
|
|||
| inspect_all
string
|
|
Level of SSL inspection.
|
||
| ports
integer
|
Ports to use for scanning (1 - 65535).
|
|||
| proxy_after_tcp_handshake
string
|
|
Proxy traffic after the TCP 3-way handshake has been established (not before).
|
||
| ssh_algorithm
string
|
|
Relative strength of encryption algorithms accepted during negotiation.
|
||
| ssh_policy_check
string
|
|
Enable/disable SSH policy check.
|
||
| ssh_tun_policy_check
string
|
|
Enable/disable SSH tunnel policy check.
|
||
| status
string
|
|
Configure protocol inspection status.
|
||
| unsupported_version
string
|
|
Action based on SSH version being unsupported.
|
||
| ssl
dictionary
|
Configure SSL options.
|
|||
| allow_invalid_server_cert
string
|
|
When enabled, allows SSL sessions whose server certificate validation failed.
|
||
| cert_validation_failure
string
|
|
Action based on certificate validation failure.
|
||
| cert_validation_timeout
string
|
|
Action based on certificate validation timeout.
|
||
| client_cert_request
string
|
|
Action based on client certificate request.
|
||
| client_certificate
string
|
|
Action based on received client certificate.
|
||
| expired_server_cert
string
|
|
Action based on server certificate is expired.
|
||
| inspect_all
string
|
|
Level of SSL inspection.
|
||
| invalid_server_cert
string
|
|
Allow or block the invalid SSL session server certificate.
|
||
| revoked_server_cert
string
|
|
Action based on server certificate is revoked.
|
||
| sni_server_cert_check
string
|
|
Check the SNI in the client hello message with the CN or SAN fields in the returned server certificate.
|
||
| unsupported_ssl
string
|
|
Action based on the SSL encryption used being unsupported.
|
||
| unsupported_ssl_cipher
string
|
|
Action based on the SSL cipher used being unsupported.
|
||
| unsupported_ssl_negotiation
string
|
|
Action based on the SSL negotiation used being unsupported.
|
||
| untrusted_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| untrusted_server_cert
string
|
|
Allow, ignore, or block the untrusted SSL session server certificate.
|
||
| ssl_anomalies_log
string
|
|
Enable/disable logging SSL anomalies.
|
||
| ssl_exempt
list / elements=string
|
Servers to exempt from SSL inspection.
|
|||
| address
string
|
IPv4 address object. Source firewall.address.name firewall.addrgrp.name.
|
|||
| address6
string
|
IPv6 address object. Source firewall.address6.name firewall.addrgrp6.name.
|
|||
| fortiguard_category
integer
|
FortiGuard category ID.
|
|||
| id
integer / required
|
ID number.
|
|||
| regex
string
|
Exempt servers by regular expression.
|
|||
| type
string
|
|
Type of address object (IPv4 or IPv6) or FortiGuard category.
|
||
| wildcard_fqdn
string
|
Exempt servers by wildcard FQDN. Source firewall.wildcard-fqdn.custom.name firewall.wildcard-fqdn.group.name.
|
|||
| ssl_exemptions_log
string
|
|
Enable/disable logging SSL exemptions.
|
||
| ssl_negotiation_log
string
|
|
Enable/disable logging SSL negotiation.
|
||
| ssl_server
list / elements=string
|
SSL servers.
|
|||
| ftps_client_cert_request
string
|
|
Action based on client certificate request during the FTPS handshake.
|
||
| ftps_client_certificate
string
|
|
Action based on received client certificate during the FTPS handshake.
|
||
| https_client_cert_request
string
|
|
Action based on client certificate request during the HTTPS handshake.
|
||
| https_client_certificate
string
|
|
Action based on received client certificate during the HTTPS handshake.
|
||
| id
integer / required
|
SSL server ID.
|
|||
| imaps_client_cert_request
string
|
|
Action based on client certificate request during the IMAPS handshake.
|
||
| imaps_client_certificate
string
|
|
Action based on received client certificate during the IMAPS handshake.
|
||
| ip
string
|
IPv4 address of the SSL server.
|
|||
| pop3s_client_cert_request
string
|
|
Action based on client certificate request during the POP3S handshake.
|
||
| pop3s_client_certificate
string
|
|
Action based on received client certificate during the POP3S handshake.
|
||
| smtps_client_cert_request
string
|
|
Action based on client certificate request during the SMTPS handshake.
|
||
| smtps_client_certificate
string
|
|
Action based on received client certificate during the SMTPS handshake.
|
||
| ssl_other_client_cert_request
string
|
|
Action based on client certificate request during an SSL protocol handshake.
|
||
| ssl_other_client_certificate
string
|
|
Action based on received client certificate during an SSL protocol handshake.
|
||
| supported_alpn
string
|
|
Configure ALPN option.
|
||
| untrusted_caname
string
|
Untrusted CA certificate used by SSL Inspection. Source vpn.certificate.local.name.
|
|||
| use_ssl_server
string
|
|
Enable/disable the use of SSL server table for SSL offloading.
|
||
| whitelist
string
|
|
Enable/disable exempting servers by FortiGuard whitelist.
|
||
| state
string / required
|
|
Indicates whether to create or remove the object.
|
||
| vdom
string
|
Default:
"root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
||
Notes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure SSL/SSH protocol options.
fortios_firewall_ssl_ssh_profile:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_ssl_ssh_profile:
allowlist: "enable"
block_blacklisted_certificates: "disable"
block_blocklisted_certificates: "disable"
caname: "<your_own_value> (source vpn.certificate.local.name)"
comment: "Optional comments."
dot:
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_certificate: "bypass"
expired_server_cert: "allow"
proxy_after_tcp_handshake: "enable"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_server_cert: "allow"
ftps:
allow_invalid_server_cert: "enable"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
invalid_server_cert: "allow"
ports: "28"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
https:
allow_invalid_server_cert: "enable"
cert_probe_failure: "allow"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
invalid_server_cert: "allow"
ports: "46"
proxy_after_tcp_handshake: "enable"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
imaps:
allow_invalid_server_cert: "enable"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
invalid_server_cert: "allow"
ports: "64"
proxy_after_tcp_handshake: "enable"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
mapi_over_https: "enable"
name: "default_name_75"
pop3s:
allow_invalid_server_cert: "enable"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
invalid_server_cert: "allow"
ports: "84"
proxy_after_tcp_handshake: "enable"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
rpc_over_https: "enable"
server_cert: "<your_own_value> (source vpn.certificate.local.name)"
server_cert_mode: "re-sign"
smtps:
allow_invalid_server_cert: "enable"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
invalid_server_cert: "allow"
ports: "105"
proxy_after_tcp_handshake: "enable"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
status: "disable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
ssh:
inspect_all: "disable"
ports: "117"
proxy_after_tcp_handshake: "enable"
ssh_algorithm: "compatible"
ssh_policy_check: "disable"
ssh_tun_policy_check: "disable"
status: "disable"
unsupported_version: "bypass"
ssl:
allow_invalid_server_cert: "enable"
cert_validation_failure: "allow"
cert_validation_timeout: "allow"
client_cert_request: "bypass"
client_certificate: "bypass"
expired_server_cert: "allow"
inspect_all: "disable"
invalid_server_cert: "allow"
revoked_server_cert: "allow"
sni_server_cert_check: "enable"
unsupported_ssl: "bypass"
unsupported_ssl_cipher: "allow"
unsupported_ssl_negotiation: "allow"
untrusted_cert: "allow"
untrusted_server_cert: "allow"
ssl_anomalies_log: "disable"
ssl_exempt:
-
address: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
address6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
fortiguard_category: "144"
id: "145"
regex: "<your_own_value>"
type: "fortiguard-category"
wildcard_fqdn: "<your_own_value> (source firewall.wildcard-fqdn.custom.name firewall.wildcard-fqdn.group.name)"
ssl_exemptions_log: "disable"
ssl_negotiation_log: "disable"
ssl_server:
-
ftps_client_cert_request: "bypass"
ftps_client_certificate: "bypass"
https_client_cert_request: "bypass"
https_client_certificate: "bypass"
id: "156"
imaps_client_cert_request: "bypass"
imaps_client_certificate: "bypass"
ip: "<your_own_value>"
pop3s_client_cert_request: "bypass"
pop3s_client_certificate: "bypass"
smtps_client_cert_request: "bypass"
smtps_client_certificate: "bypass"
ssl_other_client_cert_request: "bypass"
ssl_other_client_certificate: "bypass"
supported_alpn: "http1-1"
untrusted_caname: "<your_own_value> (source vpn.certificate.local.name)"
use_ssl_server: "disable"
whitelist: "enable"
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
| http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
| http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
| mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
| name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
| path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
| revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
| serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
| status
string
|
always |
Indication of the operation's result
Sample:
success
|
| vdom
string
|
always |
Virtual domain used
Sample:
root
|
| version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_ssl_ssh_profile_module.html