go.mod file reference

Each Go module is defined by a go.mod file that describes the module's properties, including its dependencies on other modules and on versions of Go.

These properties include:

The current module's module path. This should be a location from which the module can be downloaded by Go tools, such as the module code's repository location. This serves as a unique identifier, when combined with the module's version number. It is also the prefix of the package path for all packages in the module. For more about how Go locates the module, see the Go Modules Reference.
The minimum version of Go required by the current module.
A list of minimum versions of other modules required by the current module.
Instructions, optionally, to replace a required module with another module version or a local directory, or to exclude a specific version of a required module.

Go generates a go.mod file when you run the go mod init command. The following example creates a go.mod file, setting the module's module path to example.com/mymodule:

$ go mod init example.com/mymodule

Use go commands to manage dependencies. The commands ensure that the requirements described in your go.mod file remain consistent and the content of your go.mod file is valid. These commands include the go get and go mod tidy and go mod edit commands.

For reference on go commands, see Command go. You can get help from the command line by typing go help command-name, as with go help mod tidy.

See also

Go tools make changes to your go.mod file as you use them to manage dependencies. For more, see Managing dependencies.
For more details and constraints related to go.mod files, see the Go modules reference.

Example

A go.mod file includes directives shown in the following example. These are described in this topic.

module example.com/mymodule

go 1.14

require (
    example.com/othermodule v1.2.3
    example.com/thismodule v1.2.3
    example.com/thatmodule v1.2.3
)

replace example.com/thatmodule => ../thatmodule
exclude example.com/thismodule v1.3.0

module

Declares the module's module path, which is the module's unique identifier (when combined with the module version number). This becomes the import prefix for all packages the module contains.

Syntax

module module-path

module-path: The module's module path, usually the repository location from which the module can be downloaded by Go tools. For module versions v2 and later, this value must end with the major version number, such as /v2.

Examples

The following examples substitute example.com for a repository domain from which the module could be downloaded.

Module declaration for a v0 or v1 module:
```
module example.com/mymodule
```
Module path for a v2 module:
```
module example.com/mymodule/v2
```

Notes

The module path should be a path from which Go tools can download the module source. In practice, this is typically the module source's repository domain and path to the module code within the repository. The go command relies on this form when downloading module versions to resolve dependencies on the module user's behalf.

Even if you're not at first intending to make your module available for use from other code, using its repository path is a best practice that will help you avoid having to rename the module if you publish it later.

If at first you don't know the module's eventual repository location, consider temporarily using a safe substitute, such as the name of a domain you own or example.com, along with a path following from the module's name or source directory.

For example, if you're developing in a stringtools directory, your temporary module path might be example.com/stringtools, as in the following example:

go mod init example.com/stringtools

go

Indicates that the module was written assuming the semantics of the Go version specified by the directive.

Syntax

go minimum-go-version

minimum-go-version: The minimum version of Go required to compile packages in this module.

Examples

Module must run on Go version 1.14 or later:
```
go 1.14
```

Notes

The go directive was originally intended to support backward incompatible changes to the Go language (see Go 2 transition ). There have been no incompatible language changes since modules were introduced, but the go directive still affects use of new language features:

For packages within the module, the compiler rejects use of language features introduced after the version specified by the go directive. For example, if a module has the directive go 1.12, its packages may not use numeric literals like 1_000_000, which were introduced in Go 1.13.
If an older Go version builds one of the module's packages and encounters a compile error, the error notes that the module was written for a newer Go version. For example, suppose a module has go 1.13 and a package uses the numeric literal 1_000_000. If that package is built with Go 1.12, the compiler notes that the code is written for Go 1.13.

Additionally, the go command changes its behavior based on the version specified by the go directive. This has the following effects:

At go 1.14 or higher, automatic vendoring may be enabled. If the file vendor/modules.txt is present and consistent with go.mod, there is no need to explicitly use the -mod=vendor flag.
At go 1.16 or higher, the all package pattern matches only packages transitively imported by packages and tests in the main module. This is the same set of packages retained by go mod vendor since modules were introduced. In lower versions, all also includes tests of packages imported by packages in the main module, tests of those packages, and so on.

A go.mod file may contain at most one go directive. Most commands will add a go directive with the current Go version if one is not present.

require

Declares a module as dependency required by the current module, specifying the minimum version of the module required.

Syntax

require module-path module-version

module-path: The module's module path, usually a concatenation of the module source's repository domain and the module name. For module versions v2 and later, this value must end with the major version number, such as /v2.
module-version: The module's version. This can be either a release version number, such as v1.2.3, or a Go-generated pseudo-version number, such as v0.0.0-20200921210052-fa0125251cc4.

Examples

Requiring a released version v1.2.3:
```
require example.com/othermodule v1.2.3
```
Requiring a version not yet tagged in its repository by using a pseudo-version number generated by Go tools:
```
require example.com/othermodule v0.0.0-20200921210052-fa0125251cc4
```

Notes

When you run a go command such as go get, Go inserts require directives for each module containing imported packages. When a module isn't yet tagged in its repository, Go assigns a pseudo-version number it generates when you run the command.

You can have Go require a module from a location other than its repository by using the replace directive.

For more about version numbers, see Module version numbering.

For more about managing dependencies, see the following:

replace

Replaces the content of a module at a specific version (or all versions) with another module version or with a local directory. Go tools will use the replacement path when resolving the dependency.

Syntax

replace module-path [module-version] => replacement-path [replacement-version]

module-path: The module path of the module to replace.
module-version: Optional. A specific version to replace. If this version number is omitted, all versions of the module are replaced with the content on the right side of the arrow.
replacement-path: The path at which Go should look for the required module. This can be a module path or a path to a directory on the file system local to the replacement module. If this is a module path, you must specify a replacement-version value. If this is a local path, you may not use a replacement-version value.
replacement-version: The version of the replacement module. The replacement version may only be specified if replacement-path is a module path (not a local directory).

Examples

Replacing with a fork of the module repository

In the following example, any version of example.com/othermodule is replaced with the specified fork of its code.
```
require example.com/othermodule v1.2.3

replace example.com/othermodule => example.com/myfork/othermodule v1.2.3-fixed
```
When you replace one module path with another, do not change import statements for packages in the module you're replacing.

For more on using a forked copy of module code, see Requiring external module code from your own repository fork.
Replacing with a different version number

The following example specifies that version v1.2.3 should be used instead of any other version of the module.
```
require example.com/othermodule v1.2.2

replace example.com/othermodule => example.com/othermodule v1.2.3
```
The following example replaces module version v1.2.5 with version v1.2.3 of the same module.
```
replace example.com/othermodule v1.2.5 => example.com/othermodule v1.2.3
```
Replacing with local code

The following example specifies that a local directory should be used as a replacement for all versions of the module.
```
require example.com/othermodule v1.2.3

replace example.com/othermodule => ../othermodule
```
The following example specifies that a local directory should be used as a replacement for v1.2.5 only.
```
require example.com/othermodule v1.2.5

replace example.com/othermodule v1.2.5 => ../othermodule
```
For more on using a local copy of module code, see Requiring module code in a local directory.

Notes

Use the replace directive to temporarily substitute a module path value with another value when you want Go to use the other path to find the module's source. This has the effect of redirecting Go's search for the module to the replacement's location. You needn't change package import paths to use the replacement path.

Use the exclude and replace directives to control build-time dependency resolution when building the current module. These directives are ignored in modules that depend on the current module.

The replace directive can be useful in situations such as the following:

You're developing a new module whose code is not yet in the repository. You want to test with clients using a local version.
You've identified an issue with a dependency, have cloned the dependency's repository, and you're testing a fix with the local repository.

Note that a replace directive alone does not does not add a module to the module graph. A require directive that refers to a replaced module version is also needed, either in the main module's go.mod file or a dependency's go.mod file. If you don't have a specific version to replace, you can use a fake version, as in the example below. Note that this will break modules that depend on your module, since replace directives are only applied in the main module.

require example.com/mod v0.0.0-replace

replace example.com/mod v0.0.0-replace => ./mod

For more on replacing a required module, including using Go tools to make the change, see:

For more about version numbers, see Module version numbering.

exclude

Specifies a module or module version to exclude from the current module's dependency graph.

Syntax

exclude module-path module-version

module-path: The module path of the module to exclude.
module-version: The specific version to exclude.

Example

Exclude example.com/theirmodule version v1.3.0
```
exclude example.com/theirmodule v1.3.0
```

Notes

Use the exclude directive to exclude a specific version of a module that is indirectly required but can't be loaded for some reason. For example, you might use it to exclude a version of a module that has an invalid checksum.

Use the exclude and replace directives to control build-time dependency resolution when building the current module (the main module you're building). These directives are ignored in modules that depend on the current module.

You can use the go mod edit command to exclude a module, as in the following example.

go mod edit -exclude=example.com/theirmodule@v1.3.0

For more about version numbers, see Module version numbering.

Docs

Docs4dev

Title here

go.mod file reference

Example

module

Syntax

Examples

Notes

go

Syntax

Examples

Notes

require

Syntax

Examples

Notes

replace

Syntax

Examples

Notes

exclude

Syntax

Example

Notes