aws_dx_public_virtual_interface

Provides a Direct Connect public virtual interface resource.

Example Usage

resource "aws_dx_public_virtual_interface" "foo" {
  connection_id    = "dxcon-zzzzzzzz"

  name           = "vif-foo"
  vlan           = 4094
  address_family = "ipv4"
  bgp_asn        = 65352

  customer_address = "175.45.176.1/30"
  amazon_address   = "175.45.176.2/30"
  route_filter_prefixes = [
      "210.52.109.0/24",
      "175.45.176.0/22"
  ]
}

Argument Reference

The following arguments are supported:

• address_family - (Required) The address family for the BGP peer. ipv4 or ipv6.
• bgp_asn - (Required) The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
• connection_id - (Required) The ID of the Direct Connect connection (or LAG) on which to create the virtual interface.
• name - (Required) The name for the virtual interface.
• vlan - (Required) The VLAN ID.
• amazon_address - (Optional) The IPv4 CIDR address to use to send traffic to Amazon. Required for IPv4 BGP peers.
• bgp_auth_key - (Optional) The authentication key for BGP configuration.
• customer_address - (Optional) The IPv4 CIDR destination address to which Amazon should send traffic. Required for IPv4 BGP peers.
• route_filter_prefixes - (Required) A list of routes to be advertised to the AWS network in this region.
• tags - (Optional) A mapping of tags to assign to the resource.

Attributes Reference

The following attributes are exported:

• id - The ID of the virtual interface.
• arn - The ARN of the virtual interface.

Timeouts

aws_dx_public_virtual_interface provides the following Timeouts configuration options:

• create - (Default 10 minutes) Used for creating virtual interface
• delete - (Default 10 minutes) Used for destroying virtual interface

Import

Direct Connect public virtual interfaces can be imported using the vif id, e.g.

$ terraform import aws_dx_public_virtual_interface.test dxvif-33cc44dd