openstack_networking_subnet_v2

Use this data source to get the ID of an available OpenStack subnet.

Example Usage

data "openstack_networking_subnet_v2" "subnet_1" {
  name = "subnet_1"
}

Argument Reference

• region - (Optional) The region in which to obtain the V2 Neutron client. A Neutron client is needed to retrieve subnet ids. If omitted, the region argument of the provider is used.

• name - (Optional) The name of the subnet.

• dhcp_enabled - (Optional) If the subnet has DHCP enabled.

• dhcp_disabled - (Optional) If the subnet has DHCP disabled.

• ip_version - (Optional) The IP version of the subnet (either 4 or 6).

• ipv6_address_mode - (Optional) The IPv6 address mode. Valid values are dhcpv6-stateful, dhcpv6-stateless, or slaac.

• ipv6_ra_mode - (Optional) The IPv6 Router Advertisement mode. Valid values are dhcpv6-stateful, dhcpv6-stateless, or slaac.

• gateway_ip - (Optional) The IP of the subnet's gateway.

• cidr - (Optional) The CIDR of the subnet.

• subnet_id - (Optional) The ID of the subnet.

• subnetpool_id - (Optional) The ID of the subnetpool associated with the subnet.

• network_id - (Optional) The ID of the network the subnet belongs to.

• tenant_id - (Optional) The owner of the subnet.

Attributes Reference

id is set to the ID of the found subnet. In addition, the following attributes are exported:

• allocation_pools - Allocation pools of the subnet.
• enable_dhcp - Whether the subnet has DHCP enabled or not.
• dns_nameservers - DNS Nameservers of the subnet.
• host_routes - Host Routes of the subnet.
• region - See Argument Reference above.