openssl_csr - Generate OpenSSL Certificate Signing Request (CSR)
New in version 2.4.
Synopsis
- This module allows one to (re)generate OpenSSL certificate signing requests. It uses the pyOpenSSL python library to interact with openssl. This module supports the subjectAltName, keyUsage, extendedKeyUsage, basicConstraints and OCSP Must Staple extensions.
Requirements
The below requirements are needed on the host that executes this module.
- python-pyOpenSSL >= 0.15
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
attributes
(added in 2.3)
|
Default:
None
|
Attributes the file or directory should have. To get supported flags look at the man page for
chattr on the target system. This string should contain the attributes in the same order as the one displayed by
lsattr.
aliases: attr |
basic_constraints
(added in 2.5)
|
Indicates basic constraints, such as if the certificate is a CA.
aliases: basicConstraints |
|
basic_constraints_critical
(added in 2.5)
|
Should the basicConstraints extension be considered as critical
aliases: basicConstraints_critical |
|
common_name |
commonName field of the certificate signing request subject
aliases: CN, commonName |
|
country_name |
countryName field of the certificate signing request subject
aliases: C, countryName |
|
digest | Default:
sha256
|
Digest used when signing the certificate signing request with the private key
|
email_address |
emailAddress field of the certificate signing request subject
aliases: E, emailAddress |
|
extended_key_usage |
Additional restrictions (e.g. client authentication, server authentication) on the allowed purposes for which the public key may be used.
This can either be a 'comma separated string' or a YAML list.
aliases: extKeyUsage, extendedKeyUsage |
|
extended_key_usage_critical |
Should the extkeyUsage extension be considered as critical
aliases: extKeyUsage_critical, extendedKeyUsage_critical |
|
force |
no
|
Should the certificate signing request be forced regenerated by this ansible module
|
group | Default:
None
|
Name of the group that should own the file/directory, as would be fed to
chown.
|
key_usage |
This defines the purpose (e.g. encipherment, signature, certificate signing) of the key contained in the certificate.
This can either be a 'comma separated string' or a YAML list.
aliases: keyUsage |
|
key_usage_critical |
Should the keyUsage extension be considered as critical
aliases: keyUsage_critical |
|
locality_name |
localityName field of the certificate signing request subject
aliases: L, localityName |
|
mode | Default:
None
|
Mode the file or directory should be. For those used to
/usr/bin/chmod remember that modes are actually octal numbers (like
0644 or
01777 ). Leaving off the leading zero will likely have unexpected results. As of version 1.8, the mode may be specified as a symbolic mode (for example,
u+rwx or
u=rw,g=r,o=r ).
|
ocsp_must_staple
(added in 2.5)
|
Indicates that the certificate should contain the OCSP Must Staple extension (
https://tools.ietf.org/html/rfc7633).
aliases: ocspMustStaple |
|
ocsp_must_staple_critical
(added in 2.5)
|
Should the OCSP Must Staple extension be considered as critical
Warning: according to the RFC, this extension should not be marked as critical, as old clients not knowing about OCSP Must Staple are required to reject such certificates (see
https://tools.ietf.org/html/rfc7633#section-4).
aliases: ocspMustStaple_critical |
|
organization_name |
organizationName field of the certificate signing request subject
aliases: O, organizationName |
|
organizational_unit_name |
organizationalUnitName field of the certificate signing request subject
aliases: OU, organizationalUnitName |
|
owner | Default:
None
|
Name of the user that should own the file/directory, as would be fed to
chown.
|
path
required
|
Name of the file into which the generated OpenSSL certificate signing request will be written
|
|
privatekey_passphrase |
The passphrase for the privatekey.
|
|
privatekey_path
required
|
Path to the privatekey to use when signing the certificate signing request
|
|
selevel | Default:
s0
|
Level part of the SELinux file context. This is the MLS/MCS attribute, sometimes known as the
range .
_default feature works as for
seuser.
|
serole | Default:
None
|
Role part of SELinux file context,
_default feature works as for
seuser.
|
setype | Default:
None
|
Type part of SELinux file context,
_default feature works as for
seuser.
|
seuser | Default:
None
|
User part of SELinux file context. Will default to system policy, if applicable. If set to
_default , it will use the
user portion of the policy if available.
|
state |
|
Whether the certificate signing request should exist or not, taking action if the state is different from what is stated.
|
state_or_province_name |
stateOrProvinceName field of the certificate signing request subject
aliases: ST, stateOrProvinceName |
|
subject
(added in 2.5)
|
Key/value pairs that will be present in the subject name field of the certificate signing request.
If you need to specify more than one value with the same key, use a list as value.
|
|
subject_alt_name |
SAN extension to attach to the certificate signing request
This can either be a 'comma separated string' or a YAML list.
Values should be prefixed by their options. (i.e.,
email ,
URI ,
DNS ,
RID ,
IP ,
dirName ,
otherName and the ones specific to your CA)
aliases: subjectAltName |
|
subject_alt_name_critical |
Should the subjectAltName extension be considered as critical
aliases: subjectAltName_critical |
|
unsafe_writes
(added in 2.2)
|
|
Normally this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, sometimes systems are configured or just broken in ways that prevent this. One example are docker mounted files, they cannot be updated atomically and can only be done in an unsafe manner.
This boolean option allows ansible to fall back to unsafe methods of updating files for those cases in which you do not have any other choice. Be aware that this is subject to race conditions and can lead to data corruption.
|
version | Default:
1
|
Version of the certificate signing request
|
Notes
Note
- If the certificate signing request already exists it will be checked whether subjectAltName, keyUsage, extendedKeyUsage and basicConstraints only contain the requested values, whether OCSP Must Staple is as requested, and if the request was signed by the given private key.
Examples
# Generate an OpenSSL Certificate Signing Request - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem common_name: www.ansible.com # Generate an OpenSSL Certificate Signing Request with a # passphrase protected private key - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem privatekey_passphrase: ansible common_name: www.ansible.com # Generate an OpenSSL Certificate Signing Request with Subject information - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem country_name: FR organization_name: Ansible email_address: [email protected] common_name: www.ansible.com # Generate an OpenSSL Certificate Signing Request with subjectAltName extension - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem subject_alt_name: 'DNS:www.ansible.com,DNS:m.ansible.com' # Force re-generate an OpenSSL Certificate Signing Request - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem force: True common_name: www.ansible.com # Generate an OpenSSL Certificate Signing Request with special key usages - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem common_name: www.ansible.com key_usage: - digitalSignature - keyAgreement extended_key_usage: - clientAuth # Generate an OpenSSL Certificate Signing Request with OCSP Must Staple - openssl_csr: path: /etc/ssl/csr/www.ansible.com.csr privatekey_path: /etc/ssl/private/ansible.com.pem common_name: www.ansible.com ocsp_must_staple: true
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
basicConstraints
list
|
changed or success |
Indicates if the certificate belongs to a CA
Sample:
['CA:TRUE', 'pathLenConstraint:0']
|
extendedKeyUsage
list
|
changed or success |
Additional restriction on the public key purposes
Sample:
['clientAuth']
|
filename
string
|
changed or success |
Path to the generated Certificate Signing Request
Sample:
/etc/ssl/csr/www.ansible.com.csr
|
keyUsage
list
|
changed or success |
Purpose for which the public key may be used
Sample:
['digitalSignature', 'keyAgreement']
|
ocsp_must_staple
bool
|
changed or success |
Indicates whether the certificate has the OCSP Must Staple feature enabled
|
privatekey
string
|
changed or success |
Path to the TLS/SSL private key the CSR was generated for
Sample:
/etc/ssl/private/ansible.com.pem
|
subject
list
|
changed or success |
A list of the subject tuples attached to the CSR
Sample:
[('CN', 'www.ansible.com'), ('O', 'Ansible')]
|
subjectAltName
list
|
changed or success |
The alternative names this CSR is valid for
Sample:
['DNS:www.ansible.com', 'DNS:m.ansible.com']
|
Status
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
Author
- Yanis Guenane (@Spredzy)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/openssl_csr_module.html