On this page
torch.optim
torch.optim
is a package implementing various optimization algorithms. Most commonly used methods are already supported, and the interface is general enough, so that more sophisticated ones can also be easily integrated in the future.
How to use an optimizer
To use torch.optim
you have to construct an optimizer object that will hold the current state and will update the parameters based on the computed gradients.
Constructing it
To construct an Optimizer
you have to give it an iterable containing the parameters (all should be Variable
s) to optimize. Then, you can specify optimizerspecific options such as the learning rate, weight decay, etc.
Example:
optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
optimizer = optim.Adam([var1, var2], lr=0.0001)
Perparameter options
Optimizer
s also support specifying perparameter options. To do this, instead of passing an iterable of Variable
s, pass in an iterable of dict
s. Each of them will define a separate parameter group, and should contain a params
key, containing a list of parameters belonging to it. Other keys should match the keyword arguments accepted by the optimizers, and will be used as optimization options for this group.
Note
You can still pass options as keyword arguments. They will be used as defaults, in the groups that didn’t override them. This is useful when you only want to vary a single option, while keeping all others consistent between parameter groups.
For example, this is very useful when one wants to specify perlayer learning rates:
optim.SGD([
{'params': model.base.parameters()},
{'params': model.classifier.parameters(), 'lr': 1e3}
], lr=1e2, momentum=0.9)
This means that model.base
’s parameters will use the default learning rate of 1e2
, model.classifier
’s parameters will use a learning rate of 1e3
, and a momentum of 0.9
will be used for all parameters.
Taking an optimization step
All optimizers implement a step()
method, that updates the parameters. It can be used in two ways:
optimizer.step()
This is a simplified version supported by most optimizers. The function can be called once the gradients are computed using e.g. backward()
.
Example:
for input, target in dataset:
optimizer.zero_grad()
output = model(input)
loss = loss_fn(output, target)
loss.backward()
optimizer.step()
optimizer.step(closure)
Some optimization algorithms such as Conjugate Gradient and LBFGS need to reevaluate the function multiple times, so you have to pass in a closure that allows them to recompute your model. The closure should clear the gradients, compute the loss, and return it.
Example:
for input, target in dataset:
def closure():
optimizer.zero_grad()
output = model(input)
loss = loss_fn(output, target)
loss.backward()
return loss
optimizer.step(closure)
Base class
class torch.optim.Optimizer(params, defaults)
[source]
Base class for all optimizers.
Warning
Parameters need to be specified as collections that have a deterministic ordering that is consistent between runs. Examples of objects that don’t satisfy those properties are sets and iterators over values of dictionaries.
 Parameters

 params (iterable) – an iterable of
torch.Tensor
s ordict
s. Specifies what Tensors should be optimized.  defaults (Dict[str, Any]) – (dict): a dict containing default values of optimization options (used when a parameter group doesn’t specify them).
 params (iterable) – an iterable of
Add a param group to the 

Loads the optimizer state. 

Returns the state of the optimizer as a 

Performs a single optimization step (parameter update). 

Resets the gradients of all optimized 
Algorithms
Adadelta 
Implements Adadelta algorithm. 
Adagrad 
Implements Adagrad algorithm. 
Adam 
Implements Adam algorithm. 
AdamW 
Implements AdamW algorithm. 
SparseAdam 
SparseAdam implements a masked version of the Adam algorithm suitable for sparse gradients. 
Adamax 
Implements Adamax algorithm (a variant of Adam based on infinity norm). 
ASGD 
Implements Averaged Stochastic Gradient Descent. 
LBFGS 
Implements LBFGS algorithm, heavily inspired by minFunc. 
NAdam 
Implements NAdam algorithm. 
RAdam 
Implements RAdam algorithm. 
RMSprop 
Implements RMSprop algorithm. 
Rprop 
Implements the resilient backpropagation algorithm. 
SGD 
Implements stochastic gradient descent (optionally with momentum). 
Many of our algorithms have various implementations optimized for performance, readability and/or generality, so we attempt to default to the generally fastest implementation for the current device if no particular implementation has been specified by the user.
We have 3 major categories of implementations: forloop, foreach (multitensor), and fused. The most straightforward implementations are forloops over the parameters with big chunks of computation. Forlooping is usually slower than our foreach implementations, which combine parameters into a multitensor and run the big chunks of computation all at once, thereby saving many sequential kernel calls. A few of our optimizers have even faster fused implementations, which fuse the big chunks of computation into one kernel. We can think of foreach implementations as fusing horizontally and fused implementations as fusing vertically on top of that.
In general, the performance ordering of the 3 implementations is fused > foreach > forloop. So when applicable, we default to foreach over forloop. Applicable means the foreach implementation is available, the user has not specified any implementationspecific kwargs (e.g., fused, foreach, differentiable), and all tensors are native and on CUDA. Note that while fused should be even faster than foreach, the implementations are newer and we would like to give them more bakein time before flipping the switch everywhere. You are welcome to try them out though!
Below is a table showing the available and default implementations of each algorithm:
Algorithm 
Default 
Has foreach? 
Has fused? 

Adadelta 
foreach 
yes 
no 
Adagrad 
foreach 
yes 
no 
Adam 
foreach 
yes 
yes 
AdamW 
foreach 
yes 
yes 
SparseAdam 
forloop 
no 
no 
Adamax 
foreach 
yes 
no 
ASGD 
foreach 
yes 
no 
LBFGS 
forloop 
no 
no 
NAdam 
foreach 
yes 
no 
RAdam 
foreach 
yes 
no 
RMSprop 
foreach 
yes 
no 
Rprop 
foreach 
yes 
no 
SGD 
foreach 
yes 
no 
How to adjust learning rate
torch.optim.lr_scheduler
provides several methods to adjust the learning rate based on the number of epochs. torch.optim.lr_scheduler.ReduceLROnPlateau
allows dynamic learning rate reducing based on some validation measurements.
Learning rate scheduling should be applied after optimizer’s update; e.g., you should write your code this way:
Example:
optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
scheduler = ExponentialLR(optimizer, gamma=0.9)
for epoch in range(20):
for input, target in dataset:
optimizer.zero_grad()
output = model(input)
loss = loss_fn(output, target)
loss.backward()
optimizer.step()
scheduler.step()
Most learning rate schedulers can be called backtoback (also referred to as chaining schedulers). The result is that each scheduler is applied one after the other on the learning rate obtained by the one preceding it.
Example:
optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
scheduler1 = ExponentialLR(optimizer, gamma=0.9)
scheduler2 = MultiStepLR(optimizer, milestones=[30,80], gamma=0.1)
for epoch in range(20):
for input, target in dataset:
optimizer.zero_grad()
output = model(input)
loss = loss_fn(output, target)
loss.backward()
optimizer.step()
scheduler1.step()
scheduler2.step()
In many places in the documentation, we will use the following template to refer to schedulers algorithms.
>>> scheduler = ...
>>> for epoch in range(100):
>>> train(...)
>>> validate(...)
>>> scheduler.step()
Warning
Prior to PyTorch 1.1.0, the learning rate scheduler was expected to be called before the optimizer’s update; 1.1.0 changed this behavior in a BCbreaking way. If you use the learning rate scheduler (calling scheduler.step()
) before the optimizer’s update (calling optimizer.step()
), this will skip the first value of the learning rate schedule. If you are unable to reproduce results after upgrading to PyTorch 1.1.0, please check if you are calling scheduler.step()
at the wrong time.
Sets the learning rate of each parameter group to the initial lr times a given function. 

Multiply the learning rate of each parameter group by the factor given in the specified function. 

Decays the learning rate of each parameter group by gamma every step_size epochs. 

Decays the learning rate of each parameter group by gamma once the number of epoch reaches one of the milestones. 

Decays the learning rate of each parameter group by a small constant factor until the number of epoch reaches a predefined milestone: total_iters. 

Decays the learning rate of each parameter group by linearly changing small multiplicative factor until the number of epoch reaches a predefined milestone: total_iters. 

Decays the learning rate of each parameter group by gamma every epoch. 

Decays the learning rate of each parameter group using a polynomial function in the given total_iters. 

Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr and $T_{cur}$ is the number of epochs since the last restart in SGDR: 

Chains list of learning rate schedulers. 

Receives the list of schedulers that is expected to be called sequentially during optimization process and milestone points that provides exact intervals to reflect which scheduler is supposed to be called at a given epoch. 

Reduce learning rate when a metric has stopped improving. 

Sets the learning rate of each parameter group according to cyclical learning rate policy (CLR). 

Sets the learning rate of each parameter group according to the 1cycle learning rate policy. 

Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr, $T_{cur}$ is the number of epochs since the last restart and $T_{i}$ is the number of epochs between two warm restarts in SGDR: 
Weight Averaging (SWA and EMA)
torch.optim.swa_utils
implements Stochastic Weight Averaging (SWA) and Exponential Moving Average (EMA). In particular, the torch.optim.swa_utils.AveragedModel
class implements SWA and EMA models, torch.optim.swa_utils.SWALR
implements the SWA learning rate scheduler and torch.optim.swa_utils.update_bn()
is a utility function used to update SWA/EMA batch normalization statistics at the end of training.
SWA has been proposed in Averaging Weights Leads to Wider Optima and Better Generalization.
EMA is a widely known technique to reduce the training time by reducing the number of weight updates needed. It is a variation of Polyak averaging, but using exponential weights instead of equal weights across iterations.
Constructing averaged models
The AveragedModel
class serves to compute the weights of the SWA or EMA model.
You can create an SWA averaged model by running:
>>> averaged_model = AveragedModel(model)
EMA models are constructed by specifying the multi_avg_fn
argument as follows:
>>> decay = 0.999
>>> averaged_model = AveragedModel(model, multi_avg_fn=get_ema_multi_avg_fn(decay))
Decay is a parameter between 0 and 1 that controls how fast the averaged parameters are decayed. If not provided to get_ema_multi_avg_fn
, the default is 0.999.
get_ema_multi_avg_fn
returns a function that applies the following EMA equation to the weights:
where alpha is the EMA decay.
Here the model model
can be an arbitrary torch.nn.Module
object. averaged_model
will keep track of the running averages of the parameters of the model
. To update these averages, you should use the update_parameters()
function after the optimizer.step()
:
>>> averaged_model.update_parameters(model)
For SWA and EMA, this call is usually done right after the optimizer step()
. In the case of SWA, this is usually skipped for some numbers of steps at the beginning of the training.
Custom averaging strategies
By default, torch.optim.swa_utils.AveragedModel
computes a running equal average of the parameters that you provide, but you can also use custom averaging functions with the avg_fn
or multi_avg_fn
parameters:
avg_fn
allows defining a function operating on each parameter tuple (averaged parameter, model parameter) and should return the new averaged parameter.multi_avg_fn
allows defining more efficient operations acting on a tuple of parameter lists, (averaged parameter list, model parameter list), at the same time, for example using thetorch._foreach*
functions. This function must update the averaged parameters inplace.
In the following example ema_model
computes an exponential moving average using the avg_fn
parameter:
>>> ema_avg = lambda averaged_model_parameter, model_parameter, num_averaged:\
>>> 0.9 * averaged_model_parameter + 0.1 * model_parameter
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, avg_fn=ema_avg)
In the following example ema_model
computes an exponential moving average using the more efficient multi_avg_fn
parameter:
>>> ema_model = AveragedModel(model, multi_avg_fn=get_ema_multi_avg_fn(0.9))
SWA learning rate schedules
Typically, in SWA the learning rate is set to a high constant value. SWALR
is a learning rate scheduler that anneals the learning rate to a fixed value, and then keeps it constant. For example, the following code creates a scheduler that linearly anneals the learning rate from its initial value to 0.05 in 5 epochs within each parameter group:
>>> swa_scheduler = torch.optim.swa_utils.SWALR(optimizer, \
>>> anneal_strategy="linear", anneal_epochs=5, swa_lr=0.05)
You can also use cosine annealing to a fixed value instead of linear annealing by setting anneal_strategy="cos"
.
Taking care of batch normalization
update_bn()
is a utility function that allows to compute the batchnorm statistics for the SWA model on a given dataloader loader
at the end of training:
>>> torch.optim.swa_utils.update_bn(loader, swa_model)
update_bn()
applies the swa_model
to every element in the dataloader and computes the activation statistics for each batch normalization layer in the model.
Warning
update_bn()
assumes that each batch in the dataloader loader
is either a tensors or a list of tensors where the first element is the tensor that the network swa_model
should be applied to. If your dataloader has a different structure, you can update the batch normalization statistics of the swa_model
by doing a forward pass with the swa_model
on each element of the dataset.
Putting it all together: SWA
In the example below, swa_model
is the SWA model that accumulates the averages of the weights. We train the model for a total of 300 epochs and we switch to the SWA learning rate schedule and start to collect SWA averages of the parameters at epoch 160:
>>> loader, optimizer, model, loss_fn = ...
>>> swa_model = torch.optim.swa_utils.AveragedModel(model)
>>> scheduler = torch.optim.lr_scheduler.CosineAnnealingLR(optimizer, T_max=300)
>>> swa_start = 160
>>> swa_scheduler = SWALR(optimizer, swa_lr=0.05)
>>>
>>> for epoch in range(300):
>>> for input, target in loader:
>>> optimizer.zero_grad()
>>> loss_fn(model(input), target).backward()
>>> optimizer.step()
>>> if epoch > swa_start:
>>> swa_model.update_parameters(model)
>>> swa_scheduler.step()
>>> else:
>>> scheduler.step()
>>>
>>> # Update bn statistics for the swa_model at the end
>>> torch.optim.swa_utils.update_bn(loader, swa_model)
>>> # Use swa_model to make predictions on test data
>>> preds = swa_model(test_input)
Putting it all together: EMA
In the example below, ema_model
is the EMA model that accumulates the exponentiallydecayed averages of the weights with a decay rate of 0.999. We train the model for a total of 300 epochs and start to collect EMA averages immediately.
>>> loader, optimizer, model, loss_fn = ...
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, \
>>> multi_avg_fn=torch.optim.swa_utils.get_ema_multi_avg_fn(0.999))
>>>
>>> for epoch in range(300):
>>> for input, target in loader:
>>> optimizer.zero_grad()
>>> loss_fn(model(input), target).backward()
>>> optimizer.step()
>>> ema_model.update_parameters(model)
>>>
>>> # Update bn statistics for the ema_model at the end
>>> torch.optim.swa_utils.update_bn(loader, ema_model)
>>> # Use ema_model to make predictions on test data
>>> preds = ema_model(test_input)
© 2024, PyTorch Contributors
PyTorch has a BSDstyle license, as found in the LICENSE file.
https://pytorch.org/docs/2.1/optim.html