On this page
class IPAddr
IPAddr
provides a set of methods to manipulate an IP address. Both IPv4 and IPv6 are supported.
Example
require 'ipaddr'
ipaddr1 = IPAddr.new "3ffe:505:2::1"
p ipaddr1 #=> #<IPAddr: IPv6:3ffe:0505:0002:0000:0000:0000:0000:0001/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff>
p ipaddr1.to_s #=> "3ffe:505:2::1"
ipaddr2 = ipaddr1.mask(48) #=> #<IPAddr: IPv6:3ffe:0505:0002:0000:0000:0000:0000:0000/ffff:ffff:ffff:0000:0000:0000:0000:0000>
p ipaddr2.to_s #=> "3ffe:505:2::"
ipaddr3 = IPAddr.new "192.168.2.0/24"
p ipaddr3 #=> #<IPAddr: IPv4:192.168.2.0/255.255.255.0>
Constants
- IN4MASK
-
32 bit mask for IPv4
- IN6FORMAT
-
Format string for IPv6
- IN6MASK
-
128 bit mask for IPv6
- RE_IPV4ADDRLIKE
-
Regexp
internally used for parsing IPv4 address. - RE_IPV6ADDRLIKE_COMPRESSED
-
Regexp
internally used for parsing IPv6 address. - RE_IPV6ADDRLIKE_FULL
-
Regexp
internally used for parsing IPv6 address.
Attributes
Returns the address family of this IP address.
Public Class Methods
# File lib/ipaddr.rb, line 557
def initialize(addr = '::', family = Socket::AF_UNSPEC)
if !addr.kind_of?(String)
case family
when Socket::AF_INET, Socket::AF_INET6
set(addr.to_i, family)
@mask_addr = (family == Socket::AF_INET) ? IN4MASK : IN6MASK
return
when Socket::AF_UNSPEC
raise AddressFamilyError, "address family must be specified"
else
raise AddressFamilyError, "unsupported address family: #{family}"
end
end
prefix, prefixlen = addr.split('/')
if prefix =~ /\A\[(.*)\]\z/i
prefix = $1
family = Socket::AF_INET6
end
# It seems AI_NUMERICHOST doesn't do the job.
#Socket.getaddrinfo(left, nil, Socket::AF_INET6, Socket::SOCK_STREAM, nil,
# Socket::AI_NUMERICHOST)
@addr = @family = nil
if family == Socket::AF_UNSPEC || family == Socket::AF_INET
@addr = in_addr(prefix)
if @addr
@family = Socket::AF_INET
end
end
if !@addr && (family == Socket::AF_UNSPEC || family == Socket::AF_INET6)
@addr = in6_addr(prefix)
@family = Socket::AF_INET6
end
if family != Socket::AF_UNSPEC && @family != family
raise AddressFamilyError, "address family mismatch"
end
if prefixlen
mask!(prefixlen)
else
@mask_addr = (@family == Socket::AF_INET) ? IN4MASK : IN6MASK
end
rescue InvalidAddressError => e
raise e.class, "#{e.message}: #{addr}"
end
Creates a new ipaddr object either from a human readable IP address representation in string, or from a packed in_addr
value followed by an address family.
In the former case, the following are the valid formats that will be recognized: “address”, “address/prefixlen” and “address/mask”, where IPv6 address may be enclosed in square brackets (`[' and `]'). If a prefixlen or a mask is specified, it returns a masked IP address. Although the address family is determined automatically from a specified string, you can specify one explicitly by the optional second argument.
Otherwise an IP address is generated from a packed in_addr
value and an address family.
The IPAddr
class defines many methods and operators, and some of those, such as &, |, include? and ==, accept a string, or a packed in_addr
value instead of an IPAddr
object.
# File lib/ipaddr.rb, line 106
def self.new_ntoh(addr)
return new(ntop(addr))
end
Creates a new ipaddr containing the given network byte ordered string form of an IP address.
# File lib/ipaddr.rb, line 112
def self.ntop(addr)
case addr.size
when 4
s = addr.unpack('C4').join('.')
when 16
s = IN6FORMAT % addr.unpack('n8')
else
raise AddressFamilyError, "unsupported address family"
end
return s
end
Convert a network byte ordered string form of an IP address into human readable form.
Public Instance Methods
# File lib/ipaddr.rb, line 125
def &(other)
return self.clone.set(@addr & coerce_other(other).to_i)
end
Returns a new ipaddr built by bitwise AND.
# File lib/ipaddr.rb, line 140
def <<(num)
return self.clone.set(addr_mask(@addr << num))
end
Returns a new ipaddr built by bitwise left shift.
# File lib/ipaddr.rb, line 391
def <=>(other)
other = coerce_other(other)
rescue
nil
else
@addr <=> other.to_i if other.family == @family
end
Compares the ipaddr with another.
# File lib/ipaddr.rb, line 150
def ==(other)
other = coerce_other(other)
rescue
false
else
@family == other.family && @addr == other.to_i
end
Returns true if two ipaddrs are equal.
# File lib/ipaddr.rb, line 135
def >>(num)
return self.clone.set(@addr >> num)
end
Returns a new ipaddr built by bitwise right-shift.
# File lib/ipaddr.rb, line 401
def eql?(other)
return self.class == other.class && self.hash == other.hash && self == other
end
Checks equality used by Hash
.
# File lib/ipaddr.rb, line 239
def hton
case @family
when Socket::AF_INET
return [@addr].pack('N')
when Socket::AF_INET6
return (0..7).map { |i|
(@addr >> (112 - 16 * i)) & 0xffff
}.pack('n8')
else
raise AddressFamilyError, "unsupported address family"
end
end
Returns a network byte ordered string form of the IP address.
# File lib/ipaddr.rb, line 173
def include?(other)
other = coerce_other(other)
if ipv4_mapped?
if (@mask_addr >> 32) != 0xffffffffffffffffffffffff
return false
end
mask_addr = (@mask_addr & IN4MASK)
addr = (@addr & IN4MASK)
family = Socket::AF_INET
else
mask_addr = @mask_addr
addr = @addr
family = @family
end
if other.ipv4_mapped?
other_addr = (other.to_i & IN4MASK)
other_family = Socket::AF_INET
else
other_addr = other.to_i
other_family = other.family
end
if family != other_family
return false
end
return ((addr & mask_addr) == (other_addr & mask_addr))
end
Returns true if the given ipaddr is in the range.
e.g.:
require 'ipaddr'
net1 = IPAddr.new("192.168.2.0/24")
net2 = IPAddr.new("192.168.2.100")
net3 = IPAddr.new("192.168.3.0")
p net1.include?(net2) #=> true
p net1.include?(net3) #=> false
# File lib/ipaddr.rb, line 457
def inspect
case @family
when Socket::AF_INET
af = "IPv4"
when Socket::AF_INET6
af = "IPv6"
else
raise AddressFamilyError, "unsupported address family"
end
return sprintf("#<%s: %s:%s/%s>", self.class.name,
af, _to_string(@addr), _to_string(@mask_addr))
end
Returns a string containing a human-readable representation of the ipaddr. (“#<IPAddr: family:address/mask>”)
# File lib/ipaddr.rb, line 370
def ip6_arpa
if !ipv6?
raise InvalidAddressError, "not an IPv6 address"
end
return _reverse + ".ip6.arpa"
end
Returns a string for DNS reverse lookup compatible with RFC3172.
# File lib/ipaddr.rb, line 378
def ip6_int
if !ipv6?
raise InvalidAddressError, "not an IPv6 address"
end
return _reverse + ".ip6.int"
end
Returns a string for DNS reverse lookup compatible with RFC1886.
# File lib/ipaddr.rb, line 253
def ipv4?
return @family == Socket::AF_INET
end
Returns true if the ipaddr is an IPv4 address.
# File lib/ipaddr.rb, line 338
def ipv4_compat
warn "IPAddr\##{__callee__} is obsolete", uplevel: 1 if $VERBOSE
if !ipv4?
raise InvalidAddressError, "not an IPv4 address"
end
return self.clone.set(@addr, Socket::AF_INET6)
end
Returns a new ipaddr built by converting the native IPv4 address into an IPv4-compatible IPv6 address.
# File lib/ipaddr.rb, line 312
def ipv4_compat?
warn "IPAddr\##{__callee__} is obsolete", uplevel: 1 if $VERBOSE
_ipv4_compat?
end
Returns true if the ipaddr is an IPv4-compatible IPv6 address.
# File lib/ipaddr.rb, line 329
def ipv4_mapped
if !ipv4?
raise InvalidAddressError, "not an IPv4 address"
end
return self.clone.set(@addr | 0xffff00000000, Socket::AF_INET6)
end
Returns a new ipaddr built by converting the native IPv4 address into an IPv4-mapped IPv6 address.
# File lib/ipaddr.rb, line 307
def ipv4_mapped?
return ipv6? && (@addr >> 32) == 0xffff
end
Returns true if the ipaddr is an IPv4-mapped IPv6 address.
# File lib/ipaddr.rb, line 258
def ipv6?
return @family == Socket::AF_INET6
end
Returns true if the ipaddr is an IPv6 address.
# File lib/ipaddr.rb, line 295
def link_local?
case @family
when Socket::AF_INET
@addr & 0xffff0000 == 0xa9fe0000 # 169.254.0.0/16
when Socket::AF_INET6
@addr & 0xffc0_0000_0000_0000_0000_0000_0000_0000 == 0xfe80_0000_0000_0000_0000_0000_0000_0000
else
raise AddressFamilyError, "unsupported address family"
end
end
Returns true if the ipaddr is a link-local address. IPv4 addresses in 169.254.0.0/16 reserved by RFC 3927 and Link-Local IPv6 Unicast Addresses in fe80::/10 reserved by RFC 4291 are considered link-local.
# File lib/ipaddr.rb, line 263
def loopback?
case @family
when Socket::AF_INET
@addr & 0xff000000 == 0x7f000000
when Socket::AF_INET6
@addr == 1
else
raise AddressFamilyError, "unsupported address family"
end
end
Returns true if the ipaddr is a loopback address.
# File lib/ipaddr.rb, line 160
def mask(prefixlen)
return self.clone.mask!(prefixlen)
end
Returns a new ipaddr built by masking IP address with the given prefixlen/netmask. (e.g. 8, 64, “255.255.255.0”, etc.)
# File lib/ipaddr.rb, line 349
def native
if !ipv4_mapped? && !_ipv4_compat?
return self
end
return self.clone.set(@addr & IN4MASK, Socket::AF_INET)
end
Returns a new ipaddr built by converting the IPv6 address into a native IPv4 address. If the IP address is not an IPv4-mapped or IPv4-compatible IPv6 address, returns self.
# File lib/ipaddr.rb, line 427
def prefix
case @family
when Socket::AF_INET
n = IN4MASK ^ @mask_addr
i = 32
when Socket::AF_INET6
n = IN6MASK ^ @mask_addr
i = 128
else
raise AddressFamilyError, "unsupported address family"
end
while n.positive?
n >>= 1
i -= 1
end
i
end
Returns the prefix length in bits for the ipaddr.
# File lib/ipaddr.rb, line 446
def prefix=(prefix)
case prefix
when Integer
mask!(prefix)
else
raise InvalidPrefixError, "prefix must be an integer"
end
end
Sets the prefix length in bits
# File lib/ipaddr.rb, line 278
def private?
case @family
when Socket::AF_INET
@addr & 0xff000000 == 0x0a000000 || # 10.0.0.0/8
@addr & 0xfff00000 == 0xac100000 || # 172.16.0.0/12
@addr & 0xffff0000 == 0xc0a80000 # 192.168.0.0/16
when Socket::AF_INET6
@addr & 0xfe00_0000_0000_0000_0000_0000_0000_0000 == 0xfc00_0000_0000_0000_0000_0000_0000_0000
else
raise AddressFamilyError, "unsupported address family"
end
end
Returns true if the ipaddr is a private address. IPv4 addresses in 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16 as defined in RFC 1918 and IPv6 Unique Local Addresses in fc00::/7 as defined in RFC 4193 are considered private.
# File lib/ipaddr.rb, line 358
def reverse
case @family
when Socket::AF_INET
return _reverse + ".in-addr.arpa"
when Socket::AF_INET6
return ip6_arpa
else
raise AddressFamilyError, "unsupported address family"
end
end
Returns a string for DNS reverse lookup. It returns a string in RFC3172 form for an IPv6 address.
# File lib/ipaddr.rb, line 386
def succ
return self.clone.set(@addr + 1, @family)
end
Returns the successor to the ipaddr.
# File lib/ipaddr.rb, line 203
def to_i
return @addr
end
Returns the integer representation of the ipaddr.
# File lib/ipaddr.rb, line 411
def to_range
begin_addr = (@addr & @mask_addr)
case @family
when Socket::AF_INET
end_addr = (@addr | (IN4MASK ^ @mask_addr))
when Socket::AF_INET6
end_addr = (@addr | (IN6MASK ^ @mask_addr))
else
raise AddressFamilyError, "unsupported address family"
end
return clone.set(begin_addr, @family)..clone.set(end_addr, @family)
end
Creates a Range
object for the network address.
# File lib/ipaddr.rb, line 208
def to_s
str = to_string
return str if ipv4?
str.gsub!(/\b0{1,3}([\da-f]+)\b/i, '\1')
loop do
break if str.sub!(/\A0:0:0:0:0:0:0:0\z/, '::')
break if str.sub!(/\b0:0:0:0:0:0:0\b/, ':')
break if str.sub!(/\b0:0:0:0:0:0\b/, ':')
break if str.sub!(/\b0:0:0:0:0\b/, ':')
break if str.sub!(/\b0:0:0:0\b/, ':')
break if str.sub!(/\b0:0:0\b/, ':')
break if str.sub!(/\b0:0\b/, ':')
break
end
str.sub!(/:{3,}/, '::')
if /\A::(ffff:)?([\da-f]{1,4}):([\da-f]{1,4})\z/i =~ str
str = sprintf('::%s%d.%d.%d.%d', $1, $2.hex / 256, $2.hex % 256, $3.hex / 256, $3.hex % 256)
end
str
end
Returns a string containing the IP address representation.
# File lib/ipaddr.rb, line 234
def to_string
return _to_string(@addr)
end
Returns a string containing the IP address representation in canonical form.
# File lib/ipaddr.rb, line 130
def |(other)
return self.clone.set(@addr | coerce_other(other).to_i)
end
Returns a new ipaddr built by bitwise OR.
# File lib/ipaddr.rb, line 145
def ~
return self.clone.set(addr_mask(~@addr))
end
Returns a new ipaddr built by bitwise negation.
Protected Instance Methods
# File lib/ipaddr.rb, line 496
def mask!(mask)
case mask
when String
if mask =~ /\A\d+\z/
prefixlen = mask.to_i
else
m = IPAddr.new(mask)
if m.family != @family
raise InvalidPrefixError, "address family is not same"
end
@mask_addr = m.to_i
n = @mask_addr ^ m.instance_variable_get(:@mask_addr)
unless ((n + 1) & n).zero?
raise InvalidPrefixError, "invalid mask #{mask}"
end
@addr &= @mask_addr
return self
end
else
prefixlen = mask
end
case @family
when Socket::AF_INET
if prefixlen < 0 || prefixlen > 32
raise InvalidPrefixError, "invalid length"
end
masklen = 32 - prefixlen
@mask_addr = ((IN4MASK >> masklen) << masklen)
when Socket::AF_INET6
if prefixlen < 0 || prefixlen > 128
raise InvalidPrefixError, "invalid length"
end
masklen = 128 - prefixlen
@mask_addr = ((IN6MASK >> masklen) << masklen)
else
raise AddressFamilyError, "unsupported address family"
end
@addr = ((@addr >> masklen) << masklen)
return self
end
Set
current netmask to given mask.
# File lib/ipaddr.rb, line 475
def set(addr, *family)
case family[0] ? family[0] : @family
when Socket::AF_INET
if addr < 0 || addr > IN4MASK
raise InvalidAddressError, "invalid address"
end
when Socket::AF_INET6
if addr < 0 || addr > IN6MASK
raise InvalidAddressError, "invalid address"
end
else
raise AddressFamilyError, "unsupported address family"
end
@addr = addr
if family[0]
@family = family[0]
end
return self
end
Set
+@addr+, the internal stored ip address, to given addr
. The parameter addr
is validated using the first family
member, which is Socket::AF_INET
or Socket::AF_INET6
.
Private Instance Methods
# File lib/ipaddr.rb, line 317
def _ipv4_compat?
if !ipv6? || (@addr >> 32) != 0
return false
end
a = (@addr & IN4MASK)
return a != 0 && a != 1
end
# File lib/ipaddr.rb, line 675
def _reverse
case @family
when Socket::AF_INET
return (0..3).map { |i|
(@addr >> (8 * i)) & 0xff
}.join('.')
when Socket::AF_INET6
return ("%.32x" % @addr).reverse!.gsub!(/.(?!$)/, '\&.')
else
raise AddressFamilyError, "unsupported address family"
end
end
# File lib/ipaddr.rb, line 688
def _to_string(addr)
case @family
when Socket::AF_INET
return (0..3).map { |i|
(addr >> (24 - 8 * i)) & 0xff
}.join('.')
when Socket::AF_INET6
return (("%.32x" % addr).gsub!(/.{4}(?!$)/, '\&:'))
else
raise AddressFamilyError, "unsupported address family"
end
end
# File lib/ipaddr.rb, line 664
def addr_mask(addr)
case @family
when Socket::AF_INET
return addr & IN4MASK
when Socket::AF_INET6
return addr & IN6MASK
else
raise AddressFamilyError, "unsupported address family"
end
end
# File lib/ipaddr.rb, line 601
def coerce_other(other)
case other
when IPAddr
other
when String
self.class.new(other)
else
self.class.new(other, @family)
end
end
# File lib/ipaddr.rb, line 627
def in6_addr(left)
case left
when RE_IPV6ADDRLIKE_FULL
if $2
addr = in_addr($~[2,4])
left = $1 + ':'
else
addr = 0
end
right = ''
when RE_IPV6ADDRLIKE_COMPRESSED
if $4
left.count(':') <= 6 or raise InvalidAddressError, "invalid address"
addr = in_addr($~[4,4])
left = $1
right = $3 + '0:0'
else
left.count(':') <= ($1.empty? || $2.empty? ? 8 : 7) or
raise InvalidAddressError, "invalid address"
left = $1
right = $2
addr = 0
end
else
raise InvalidAddressError, "invalid address"
end
l = left.split(':')
r = right.split(':')
rest = 8 - l.size - r.size
if rest < 0
return nil
end
(l + Array.new(rest, '0') + r).inject(0) { |i, s|
i << 16 | s.hex
} | addr
end
# File lib/ipaddr.rb, line 612
def in_addr(addr)
case addr
when Array
octets = addr
else
m = RE_IPV4ADDRLIKE.match(addr) or return nil
octets = m.captures
end
octets.inject(0) { |i, s|
(n = s.to_i) < 256 or raise InvalidAddressError, "invalid address"
s.match(/\A0./) and raise InvalidAddressError, "zero-filled number in IPv4 address is ambiguous"
i << 8 | n
}
end
Ruby Core © 1993–2020 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.