Class yii\redis\Connection

All Classes | Properties | Methods | Events

Inheritance	yii\redis\Connection » yii\base\Component » yii\base\Object
Implements	yii\base\Configurable
Available since version	2.0
Source Code	https://github.com/yiisoft/yii2-redis/blob/master/Connection.php

The redis connection class is used to establish a connection to a redis server.

By default it assumes there is a redis server running on localhost at port 6379 and uses the database number 0.

It is possible to connect to a redis server using $hostname and $port or using a $unixSocket.

It also supports the AUTH command of redis. When the server needs authentication, you can set the $password property to authenticate with the server after connect.

The execution of redis commands is possible with via executeCommand().

Public Properties

Property	Type	Description	Defined By
$behaviors	yii\base\Behavior[]	List of behaviors attached to this component	yii\base\Component
$connectionTimeout	float	Timeout to use for connection to redis.	yii\redis\Connection
$dataTimeout	float	Timeout to use for redis socket when reading and writing data.	yii\redis\Connection
$database	integer	The redis database to use.	yii\redis\Connection
$driverName	string	Name of the DB driver	yii\redis\Connection
$hostname	string	The hostname or ip address to use for connecting to the redis server.	yii\redis\Connection
$isActive	boolean	Whether the DB connection is established	yii\redis\Connection
$luaScriptBuilder	yii\redis\LuaScriptBuilder		yii\redis\Connection
$password	string	The password for establishing DB connection.	yii\redis\Connection
$port	integer	The port to use for connecting to the redis server.	yii\redis\Connection
$redisCommands	array	List of available redis commands.	yii\redis\Connection
$socketClientFlags	integer	Bitmask field which may be set to any combination of connection flags passed to [stream_socket_client()](http://php.	yii\redis\Connection
$unixSocket	string	The unix socket path (e.g. `/var/run/redis/redis.	yii\redis\Connection

Public Methods

Method	Description	Defined By
__call()	Allows issuing all supported commands via magic methods.	yii\redis\Connection
__clone()	This method is called after the object is created by cloning an existing one.	yii\base\Component
__construct()	Constructor.	yii\base\Object
__get()	Returns the value of a component property.	yii\base\Component
__isset()	Checks if a property is set, i.e. defined and not null.	yii\base\Component
__set()	Sets the value of a component property.	yii\base\Component
__sleep()	Closes the connection when this component is being serialized.	yii\redis\Connection
__unset()	Sets a component property to be null.	yii\base\Component
attachBehavior()	Attaches a behavior to this component.	yii\base\Component
attachBehaviors()	Attaches a list of behaviors to the component.	yii\base\Component
behaviors()	Returns a list of behaviors that this component should behave as.	yii\base\Component
canGetProperty()	Returns a value indicating whether a property can be read.	yii\base\Component
canSetProperty()	Returns a value indicating whether a property can be set.	yii\base\Component
className()	Returns the fully qualified name of this class.	yii\base\Object
close()	Closes the currently active DB connection.	yii\redis\Connection
detachBehavior()	Detaches a behavior from the component.	yii\base\Component
detachBehaviors()	Detaches all behaviors from the component.	yii\base\Component
ensureBehaviors()	Makes sure that the behaviors declared in behaviors() are attached to this component.	yii\base\Component
executeCommand()	Executes a redis command.	yii\redis\Connection
getBehavior()	Returns the named behavior object.	yii\base\Component
getBehaviors()	Returns all behaviors attached to this component.	yii\base\Component
getDriverName()	Returns the name of the DB driver for the current \yii\redis\dsn.	yii\redis\Connection
getIsActive()	Returns a value indicating whether the DB connection is established.	yii\redis\Connection
getLuaScriptBuilder()		yii\redis\Connection
hasEventHandlers()	Returns a value indicating whether there is any handler attached to the named event.	yii\base\Component
hasMethod()	Returns a value indicating whether a method is defined.	yii\base\Component
hasProperty()	Returns a value indicating whether a property is defined for this component.	yii\base\Component
init()	Initializes the object.	yii\base\Object
off()	Detaches an existing event handler from this component.	yii\base\Component
on()	Attaches an event handler to an event.	yii\base\Component
open()	Establishes a DB connection.	yii\redis\Connection
trigger()	Triggers an event.	yii\base\Component

Protected Methods

Method	Description	Defined By
initConnection()	Initializes the DB connection.	yii\redis\Connection

Events

Event	Type	Description	Defined By
EVENT_AFTER_OPEN	\yii\redis\Event	An event that is triggered after a DB connection is established	yii\redis\Connection

Property Details

$connectionTimeout public property

Timeout to use for connection to redis. If not set the timeout set in php.ini will be used: ini_get("default_socket_timeout").

public float $connectionTimeout = null

$dataTimeout public property

Timeout to use for redis socket when reading and writing data. If not set the php default value will be used.

public float $dataTimeout = null

$database public property

The redis database to use. This is an integer value starting from 0. Defaults to 0. Since version 2.0.6 you can disable the SELECT command sent after connection by setting this property to null.

public integer $database = 0

$driverName public read-only property

Name of the DB driver

public string getDriverName ( )

$hostname public property

The hostname or ip address to use for connecting to the redis server. Defaults to 'localhost'. If $unixSocket is specified, hostname and port will be ignored.

public string $hostname = 'localhost'

$isActive public read-only property

Whether the DB connection is established

public boolean getIsActive ( )

$luaScriptBuilder public read-only property

public yii\redis\LuaScriptBuilder getLuaScriptBuilder ( )

$password public property

The password for establishing DB connection. Defaults to null meaning no AUTH command is sent. See http://redis.io/commands/auth

public string $password = null

$port public property

The port to use for connecting to the redis server. Default port is 6379. If $unixSocket is specified, hostname and port will be ignored.

public integer $port = 6379

$redisCommands public property

List of available redis commands.

See also http://redis.io/commands.

public array $redisCommands = ['APPEND', 'AUTH', 'BGREWRITEAOF', 'BGSAVE', 'BITCOUNT', 'BITFIELD', 'BITOP', 'BITPOS', 'BLPOP', 'BRPOP', 'BRPOPLPUSH', 'CLIENT KILL', 'CLIENT LIST', 'CLIENT GETNAME', 'CLIENT PAUSE', 'CLIENT REPLY', 'CLIENT SETNAME', 'CLUSTER ADDSLOTS', 'CLUSTER COUNTKEYSINSLOT', 'CLUSTER DELSLOTS', 'CLUSTER FAILOVER', 'CLUSTER FORGET', 'CLUSTER GETKEYSINSLOT', 'CLUSTER INFO', 'CLUSTER KEYSLOT', 'CLUSTER MEET', 'CLUSTER NODES', 'CLUSTER REPLICATE', 'CLUSTER RESET', 'CLUSTER SAVECONFIG', 'CLUSTER SETSLOT', 'CLUSTER SLAVES', 'CLUSTER SLOTS', 'COMMAND', 'COMMAND COUNT', 'COMMAND GETKEYS', 'COMMAND INFO', 'CONFIG GET', 'CONFIG REWRITE', 'CONFIG SET', 'CONFIG RESETSTAT', 'DBSIZE', 'DEBUG OBJECT', 'DEBUG SEGFAULT', 'DECR', 'DECRBY', 'DEL', 'DISCARD', 'DUMP', 'ECHO', 'EVAL', 'EVALSHA', 'EXEC', 'EXISTS', 'EXPIRE', 'EXPIREAT', 'FLUSHALL', 'FLUSHDB', 'GEOADD', 'GEOHASH', 'GEOPOS', 'GEODIST', 'GEORADIUS', 'GEORADIUSBYMEMBER', 'GET', 'GETBIT', 'GETRANGE', 'GETSET', 'HDEL', 'HEXISTS', 'HGET', 'HGETALL', 'HINCRBY', 'HINCRBYFLOAT', 'HKEYS', 'HLEN', 'HMGET', 'HMSET', 'HSET', 'HSETNX', 'HSTRLEN', 'HVALS', 'INCR', 'INCRBY', 'INCRBYFLOAT', 'INFO', 'KEYS', 'LASTSAVE', 'LINDEX', 'LINSERT', 'LLEN', 'LPOP', 'LPUSH', 'LPUSHX', 'LRANGE', 'LREM', 'LSET', 'LTRIM', 'MGET', 'MIGRATE', 'MONITOR', 'MOVE', 'MSET', 'MSETNX', 'MULTI', 'OBJECT', 'PERSIST', 'PEXPIRE', 'PEXPIREAT', 'PFADD', 'PFCOUNT', 'PFMERGE', 'PING', 'PSETEX', 'PSUBSCRIBE', 'PUBSUB', 'PTTL', 'PUBLISH', 'PUNSUBSCRIBE', 'QUIT', 'RANDOMKEY', 'READONLY', 'READWRITE', 'RENAME', 'RENAMENX', 'RESTORE', 'ROLE', 'RPOP', 'RPOPLPUSH', 'RPUSH', 'RPUSHX', 'SADD', 'SAVE', 'SCARD', 'SCRIPT DEBUG', 'SCRIPT EXISTS', 'SCRIPT FLUSH', 'SCRIPT KILL', 'SCRIPT LOAD', 'SDIFF', 'SDIFFSTORE', 'SELECT', 'SET', 'SETBIT', 'SETEX', 'SETNX', 'SETRANGE', 'SHUTDOWN', 'SINTER', 'SINTERSTORE', 'SISMEMBER', 'SLAVEOF', 'SLOWLOG', 'SMEMBERS', 'SMOVE', 'SORT', 'SPOP', 'SRANDMEMBER', 'SREM', 'STRLEN', 'SUBSCRIBE', 'SUNION', 'SUNIONSTORE', 'SWAPDB', 'SYNC', 'TIME', 'TOUCH', 'TTL', 'TYPE', 'UNSUBSCRIBE', 'UNLINK', 'UNWATCH', 'WAIT', 'WATCH', 'ZADD', 'ZCARD', 'ZCOUNT', 'ZINCRBY', 'ZINTERSTORE', 'ZLEXCOUNT', 'ZRANGE', 'ZRANGEBYLEX', 'ZREVRANGEBYLEX', 'ZRANGEBYSCORE', 'ZRANK', 'ZREM', 'ZREMRANGEBYLEX', 'ZREMRANGEBYRANK', 'ZREMRANGEBYSCORE', 'ZREVRANGE', 'ZREVRANGEBYSCORE', 'ZREVRANK', 'ZSCORE', 'ZUNIONSTORE', 'SCAN', 'SSCAN', 'HSCAN', 'ZSCAN']

$socketClientFlags public property (available since version 2.0.5)

Bitmask field which may be set to any combination of connection flags passed to stream_socket_client(). Currently the select of connection flags is limited to STREAM_CLIENT_CONNECT (default), STREAM_CLIENT_ASYNC_CONNECT and STREAM_CLIENT_PERSISTENT.

public integer $socketClientFlags = STREAM_CLIENT_CONNECT

$unixSocket public property (available since version 2.0.1)

The unix socket path (e.g. /var/run/redis/redis.sock) to use for connecting to the redis server. This can be used instead of $hostname and $port to connect to the server using a unix socket. If a unix socket path is specified, $hostname and $port will be ignored.

public string $unixSocket = null

Method Details

__call() public method

Allows issuing all supported commands via magic methods.

$redis->hmset('test_collection', 'key1', 'val1', 'key2', 'val2')

public mixed __call ( $name, $params )
$name	string	Name of the missing method to execute
$params	array	Method call arguments

__sleep() public method

Closes the connection when this component is being serialized.

public array __sleep ( )

close() public method

Closes the currently active DB connection.

It does nothing if the connection is already closed.

public void close ( )

executeCommand() public method

Executes a redis command.

For a list of available commands and their parameters see http://redis.io/commands.

The params array should contain the params separated by white space, e.g. to execute SET mykey somevalue NX call the following:

$redis->executeCommand('SET', ['mykey', 'somevalue', 'NX']);

public array\|boolean\|null\|string executeCommand ( $name, $params = [] )
$name	string	The name of the command
$params	array	List of parameters for the command
return	array\|boolean\|null\|string	Dependent on the executed command this method will return different data types: `true` for commands that return "status reply" with the message `'OK'` or `'PONG'`. `string` for commands that return "status reply" that does not have the message `OK` (since version 2.0.1). `string` for commands that return "integer reply" as the value is in the range of a signed 64 bit integer. `string` or `null` for commands that return "bulk reply". `array` for commands that return "Multi-bulk replies". See redis protocol description for details on the mentioned reply types.
throws	yii\db\Exception	for commands that return error reply.

getDriverName() public method

Returns the name of the DB driver for the current \yii\redis\dsn.

public string getDriverName ( )
return	string	Name of the DB driver

getIsActive() public method

Returns a value indicating whether the DB connection is established.

public boolean getIsActive ( )
return	boolean	Whether the DB connection is established

getLuaScriptBuilder() public method

public yii\redis\LuaScriptBuilder getLuaScriptBuilder ( )

initConnection() protected method

Initializes the DB connection.

This method is invoked right after the DB connection is established. The default implementation triggers an EVENT_AFTER_OPEN event.

protected void initConnection ( )

open() public method

Establishes a DB connection.

It does nothing if a DB connection has already been established.

public void open ( )
throws	yii\db\Exception	if connection fails

Event Details

EVENT_AFTER_OPEN event of type \yii\redis\Event

An event that is triggered after a DB connection is established

© 2008–2017 by Yii Software LLC
Licensed under the three clause BSD license.
http://www.yiiframework.com/doc-2.0/yii-redis-connection.html

Docs

Docs4dev

Title here